There was a thread here a while back where we talked about "that mod you cannot live without", I mentioned this one, and a few people asked for it, so here it is.
Basically the mod stores any raid setup you've ever created and will recall it instantly at any time.
I hope this can be of use to some of the people who post here.
This mod was written by an officer of my guild, Tanka.
Snippet from curse:
If you have any questions or mod requests that might help your raid, I'm willing to bet we could fire one up.
This mod is written from scratch by Tanka of The Flying Hellfish. This mod is written by a fairly hardcore programmer, and is not yet completely user friendly, but after 2-3 minutes of playing with it it is quite simple to understand and use.
Raid restore is a mod built for raid leaders only - and those who assist the raid leader.
It performs the task of organizing groups for you, instantly - recalling any previous raid setup you have previously used. This is one of the most time consuming parts of managing a raid for a raid leader, and in farming instances it can shave off well over an hour from the entire night.
Raid restore is capable of storing over 500 raid setups.
Raid restore stores both classes, and names of the players into specific group positions (very valuable for horde).
1. Names are prioritized over classes.
2. Classes are prioritized next.
3. Types of classes are final classification - meaning if there are 4 shamans in the raid, and the stored raid profile asks for 5, it will attempt to put a druid or priest in the remaining slot because they are "healers."
The /rr show GUI is a large window that shows all 40 raid slots, with a few other buttons up top.
First, press the + button and name the raid, preferrable put a preface to it: BWL Vaelastraz, or: Nax Patchwerk
The preface is useful in an advanced sorting feature mentioned later.
When in a raid, for say, Vaelastrasz... you may want 1 priest per group, and not care about the rest.
You can hand select over each group, 1 slot from each group to say "Priest".
You'd then UPDATE this raid, to permanently store it, and selecting the raid from the icon with right click will put 1 priest per group.
Alternatively (and how I use it), you can simply left-click "classes" up above and all the current classes currently being used will be filled into the table, and update will permanently store this raid makeup for later.
Right clicking names/classes clears names/classes respectively, left clicking fills them out w/the current setup. You can always hand type everything in if you want to get really fancy w/stuff, or use less transitional overhead.
Many people like to keep the same position on C'Thun, so names may be useful for you:
Hit +, store as AQ Cthun1
Hit classes to flush out classes.
Hit names to fill in names.
Hit update to permanently store your positions.
Bam, next AQ40, you hit 1 button, and you are now perfectly setup the same as last week.
Going through BWL/MC/AQ with all bosses saved will now be as fast as your legs can travel and your healers can drink.
Finally - how do you actually get the raids restored?
1. There is a floating icon that you can move with left clik. Anchor this anywhere you like.
Right clicking on this icon brings up all stored raids, and selecting a raid from that list restores that raid instantly.
If you fill up too many slots, you'll need to subsort raids by prefix.
Shift-right clicking the icon sorts by prefix.
Then right clicking will select within all raids of this prefix.
So if you're in BWL, and all raids have a BWL prefix, then you will only see your BWL prefixed raids when right clicking, making it that much easier to select your setup.
2. Click on "Toggle" under the /rr show gui.
This brings up a mini dual-boxed element.
You can right-click select any raid you want from this box, and store two of them in these boxes. Left clicking restores the raids selected.
Meaning, you're busy fighting razorgore, or nefarian and want to change groups instantly while transitioning? Have nefarian2 or razorgore2 preloaded into the toggle box, and hit it.
Bam, you're now setup for phase 2 WHILE in transit, doing nothing more than clicking a single button, that rearranges all 40 members instantly to how you have predetermined.
This mod has no outside dependencies.
Bugs: Some people may be disconnected while hitting a raid restore. Fortunately, this is extraordinarily rare. However, significant transitional changes while in combat can lag the raid for up to 2 full seconds. Be careful with overdoing it in combat (don't change 40 slots for phase 2's). Before fighting its not an issue.
We're currently working on timers that keep accurate count and countdown of sunder and demo shouts - which is seriously not as trivial as it may sound... and of course a sunder or demo that falls can spell doom!